Hospital Bed
A35 Steel plastic - sprayed single shaker hospital bed
Back adjustment 60°±5°; The bed plate is made of cold rolled steel plate，the bearing capacity of the bed is not less than 240KG.
The skeleton of the bed adopts 80*40*1.5 shaped square tube welding
The bed surface adopts 1.2mm cold rolled steel plate
Back adjustment 60°±5°; The bed plate is made of cold rolled steel plate，the bearing capacity of the bed is not less than 240KG.
The skeleton of the bed adopts 80*40*1.5 shaped square tube welding
The bed surface adopts 1.2mm cold rolled steel plate.
The head and tail of the bed are made of φ 38×1.5mm steel tube.
There is an infusion stand jack on the opposite corner, which can be equipped with an infusion stand.
SIZE： 2030×900×500mm
The skeleton of the bed adopts 80*40*1.5 shaped square tube welding
The bed surface adopts 1.2mm cold rolled steel plate.
The head and tail of the bed are made of φ 38×1.5mm steel tube.
There is an infusion stand jack on the opposite corner, which can be equipped with an infusion stand.
SIZE： 2030×900×500mm
Hospital Bed
L I S
Product Feature
good anti-slip and air permeability
01
Product Introduction
Back adjustment 60°±5°; The bed plate is made of cold rolled steel plate，the bearing capacity of the bed is not less than 240KG.
The skeleton of the bed adopts 80*40*1.5 shaped square tube welding
The bed surface adopts 1.2mm cold rolled steel plate.
The head and tail of the bed are made of φ 38×1.5mm steel tube.
There is an infusion stand jack on the opposite corner, which can be equipped with an infusion stand.
SIZE： 2030×900×500mm
The skeleton of the bed adopts 80*40*1.5 shaped square tube welding
The bed surface adopts 1.2mm cold rolled steel plate.
The head and tail of the bed are made of φ 38×1.5mm steel tube.
There is an infusion stand jack on the opposite corner, which can be equipped with an infusion stand.
SIZE： 2030×900×500mm
